Operating Manual
Computer specification
compatibility issues
Ensure PC meets minimum
specification
6.2/6.3
8.0
Additional Information
8.1
Maintenance Information
Following use, the thermal imager should always be cleaned and inspected for damage.
In the event of damage being detected (for example, cracked or broken window or housing), the
thermal imager should be withdrawn from service immediately and returned to an authorised service
centre for repair.
The thermal imager should be cleaned using warm soapy water and non-abrasive cleaners. Allow the
thermal imager to dry before replacing it into the carry case.
Ensure all battery contacts of the thermal imager and the batteries are clean and free from debris as
this may prevent electrical connection.
It is recommended that the IR window and display be treated with anti-fog solutions as used on
SCBA/BA facemasks.
To ensure long service life, it is recommended that the thermal imager and its accessories are stored
in a temperate environment (15
°
C to 25
°
C, moderate humidity) at all times.
The batteries should always be removed from the thermal imager before storage for extended
periods.
8.2
Warranty Agreement
Infrared Systems Group Ltd. warrants the thermal imager and its accessories to be free from defects
in materials and workmanship for a period of twenty-four (24) Months from the date of shipment from
the factory. This warranty is in lieu of all other warranties expressed or implied.
This warranty applies to the following:
•
Thermal imager
•
Batteries
•
Battery charger system
•
Carry case
•
Standard and optional accessory items
This warranty does not apply to fabric components as they can be adversely affected by undue
exposure to heat, sun, ozone or other hostile conditions.
Warranty Disclaimer
This warranty shall be null and void if ISG INFRASYS determines that the thermal imager or its
accessories have been damaged by neglect, misuse, accident, abuse, power surges, over-exposure to
heat, abnormal wear and tear, or other perils outside the design tolerances of the thermal imager.
The following additional conditions shall void all warranties:
© Copyright 2011, Infrared Systems Group Ltd.
Page 30 of 34
While ISG Infrasys has taken care to ensure the accuracy of the information contained herein, it accepts no responsibility for
the consequences of any use thereof and reserves the right to change the specification of goods without notice.
