Infotrend EonStor DS B Series Page 99 Hardware Manual Download

Page: 99 / 157

EonStor DS B12/B24 Series

TCP/IP network, via the Ethernet Management port. The management

session is conducted using the Ethernet management port. For more

details, see the SANWatch manual in the CD-ROM.

SANWatch’s Notification Manager notifies users or events through email, MSN, etc.

Notification Manager



LEDs

: LED indicators notify users of system status, events, and failures.

LEDs are located on both the front and rear panel of the chassis. For

details, see and subsequent sections.



Audible alarm:

Audible alarm will be triggered in case of system

failures. For details, see

PSU / Cooling Module LEDs

Summary of Contents for EonStor DS B Series






























































































































































Search results

Summary of Contents for EonStor DS B Series

Reviews:

Related manuals for EonStor DS B Series

Brands by name

Popular brands

Infotrend EonStor DS B Series, Hardware Manual

Search results

Summary of Contents for EonStor DS B Series

Reviews:

Related manuals for EonStor DS B Series

Brands by name

Popular brands