34
35
347
9.7
108.7
67.4
258.4
298.5
110
277.5
166
197
1.5
194
104
5XM4(10MM)
note:
●
if the "
input search" function in the Auto Setup option is set to "On", once you press the AuTO
button, the projector will search for input signals automatically. The AuTO searching function
maybe invalid for input of
"uSB display", "memory viewer" and "network".
●
The following function will be invaild : Freeze, Aspect ratio, image mode, Auto setup
，
and
pattern and Screen,once "uSB display", "memory viewer", "network" has been selected as
signal input.
●
For further details about memory Viewer function, please turn to page 74-76.
●
For further details about uSB display function, please turn to page 76-78.
Basic operation
Remote controller
hDmi
VgA
Video
Top Control panel
input
Component
Select input Component if a pC is connected to
the Ypbpr terminal.
Video
Select input Video if a pC is connected to the
Video terminal.
S- video
Select input S- video if a device is connected to
the S- video terminal.
network
Select input network if a device is connected to
the LAn terminal.
memory Viewer
Select input memory Viewer if a device is con-
nected to the uSB-A terminal.
uSB Display
Select input uSB Display if a device is connect-
ed to the uSB-B terminal.
Select Auto pC Adj. function can adjusts Fine sync, h position, V position , h size to be compati-
ble with the computer automatically.
menu operation
AuTO pC adj.
press < menu > button on the remote controller or
on the top control panel to display the OSD menu.
press
button to select the Display menu ,then
press <OK> or
button
.
1) press
button to select [Auto pC adj.] menu.
2) press <OK> button.
Auto pC adj.
(Only for pC signal input)
Adujust image to the best state When the image
jitters, or the image outline dims.
1) press
button to select [Fine sync] menu.
2) press <OK> button.
3) press
button to adjust Fine sync
.
Adjustment range is from 0 to +31. please adjust to
the least interference state.
Fine sync
(Only for pC signal input)
On the premise that the relative position of both pro-
jector and the screen is set up right,you can move
the image horizontal position,if the position of the
projected image on the screen is deviated.
1) press
button to select [h position] menu.
2) press <OK> button.
3) press
button to adjust image h position.
Adjustment range is from -5 to +5.
h position
Display
AuTO pC adj. menu
note:
●
The projector will perform Auto
pC Adjustment function auto-
matically,when its signal is input
for the first time.
● Auto PC Adjustment function
may fail to work if computer
models is not compatible with
the input signal .
● Auto PC Adjustment function
may fail to work if you select the
following system signal format
：
480i, 576i, 480p, 576p, 720p,
1080i,1080p, or signals from the
hDmi terminal.
input menu
