INFOTO PCL-LT112W, User Manual

Page: 17 / 50

32 33
VgA 1
Basic operation
Timer (TimeR)
press the TimeR button on remote controller.
A timer animation (00:00) displays on the upper
right conner and starts timing in format of (00:00-
59:59).
press the TimeR button to stop timing. press
the TimeR button again to disable the timing
function.
Digital Zoom + (D.ZOOm+)
press the D.ZOOm+ button on remote controller
to enter the Digital Zoom mode.
When OSD menu disappear, the screen display
digital zoom + information.
*Only for input as VgA, RgBhV, and the screen
size setting as normal or Wide.
Digital Zoom - (D.ZOOm-)
press the D.ZOOm- button on remote controller
to enter the Digital Zoom mode.
When OSD menu disappear, the screen display
digital zoom - information.
press any other key to exit the Digital Zoom + / -
mode
Screen size selection (SCReen)
press the SCReen button on remote controller
to select required screen size mode.
press the SCReen button on the remote control
to select the size of the screen to return to the
normal screen size.
Timer
Screen
Zoom+/-
Remote controller
02
：
02
Timer display
input selection
Basic operation
Basic operation
press the inpuT button on the control panel or
on the romote control to select one of the fol-
lowing input: VgA 1, VgA 2, Component,Video,
S-Video, hDmi 1,hDmi 2(mhL),DVi, memory
Viewer, network, uSB Display. Alternatively,
you may press the VgA, hDmi ViDeO button
on remote controller to select VgA1,VgA2,hD-
mi,hDmi 2(mhL),ViDeO,COmpnenT,S-ViDeO.
menu operation
1 press the inpuT button on remote controller
to enter the input menu.
2 press button to select one of the follow-
ing input: VgA1, VgA 2, Component,Video,
S-Video, hDmi 1,hDmi 2(mhL),DVi, memory
Viewer, network, uSB Display, and then press
the OK button to select the input source.
Remote controller
input
Top Control panel
input
Select input VgA 1 if a pC is connected to the
VgA in terminal.
VgA 2
Select input VgA 2 if a pC is connected to the
VgA in 2 terminal.
hDmi 1
Select input hDmi 1 if a device is connected to
the hDmi terminal.
hDmi 2
Select input hDmi 2(mhL) if a device is con-
nected to the hD mi 2(mhL) terminal.
note:
● If the "
input search" function in the
Auto Setup option is set to "On", once
you press the AuTO button, the projec-
tor will search for input signals automati-
cally.
● When select VGA 2 / VGA OUT terminal
as output signanl , you cannot select
VgA 2.
347
9.7
108.7
67.4
258.4
298.5
110
277.5
166
197
1.5
194
104
5XM4(10MM)
input menu