29
6-6 Setting the Output Signal Level, Duration Pulse
Width
1. The FV5X code reader provides two specifications of output level signal settings. If
"24V pull-up" is set to on, the output signal level is 24V
。
2.IO output logic, OUT1-OUT2 output level signals are all 24V.
3. The default IO output logic, OUT1 is success, OUT2 is failure, the output level signal
pulse width of reading success and reading failure are both 50ms, the signal pulse width
can be set according to needs, the maximum can be set to 10000ms, After setting,
"Download Configuration" must be clicked to download the set configuration to the
scanner.
