EonStor U16U Installation and Hardware Reference Manual
2-10
Memory Module Installation/Upgrade
When lifting the IO board it is best to elevate the back end of the board and then,
before sliding it out of the module, place it at a slight angle to the controller
module (see
Figure 2-3
). Once the IO board has been removed, place it on a
dry, safe, static free surface to prevent damage.
Figure 2-3: Remove the Host IO Board
Step 6.
Remove the pre-installed DIMM
–The DIMM slot should now be visible with
the currently installed SDRAM DIMM module.
Gently open the white clips
on
either side of the slot and the DIMM module will be dislodged. Remove the
DIMM module placing it in a safe place.
Step 7.
Insert the new DIMM Module - Line the new SDRAM DIMM module up with
the slot
and gently (but firmly) push it in. The white clips on either side of the
slot should automatically close and lock the new SDRAM DIMM module into
place. (See
Figure 2-4
)
Figure 2-4: DIMM Installation