EonStor S12S-R/G1032 Installation and Hardware Reference Manual
Figure 5-14: Removing a Cooling Module
Step 3.
Remove the
retention screw
on the side of PSU
canister and push the
release tab
forward to
disengage the cooling module.
Step 4.
Remove the cooling fan assembly by the following
steps:
Step 4-1. Use your thumb and middle fingers to seize the cooling
fan assembly, your thumb by the upper edge of the fan
guard and your middle finger at the hemispheric indent.
Step 4-2 Use one hand to push the release tab forward and
another to remove the fan assembly with a precisely
vertical motion.
Step 5.
Install the replacement module
by aligning it with the
module bay on the PSU module and gently lowering it
into. The fan outlet should be aligned with the PSU
5-18
Cooling Module Maintenance
