EonStor S12S-R/G1032 Installation and Hardware Reference Manual
Figure 2-7: Opening the Drive Tray Front Flap
Step 3.
Align the drive tray with the tray slot
into which you
wish to insert it. Make sure that it is properly aligned,
and then gently slide it in. This should be done
smoothly and gently. (See
Figure 2-8
)
Slamming the drive tray into the chassis can damage
the back-end connector.
Figure 2-8: Installing a Drive Tray
Step 4.
Close the front flap of the drive tray.
Make sure the
front flap is closed properly to ensure that the
connector at the back of the hard drive is firmly
connected to the corresponding connector on the
backplane board. If the front flap is not closed properly,
the connection between the hard drive and the
subsystem will not be secure.
Step 5.
Lock the flap into place
by turning the rotary bezel
lock until the groove on its face is pointing down
(vertical orientation). (See
Figure 2-9
)
2-12
Drive Tray Installation
