inform DSP FLEXIPOWER SERIES, User Manual

Page: 33 / 52

28
21 Bypass Input Normal LED
22 UPS under Redundancy Mode
23 UPS under ECO Mode
24 UPS Fault or Abnormal Warning LED
25 EPO Emergency Power Off
26 Er05 Battery Weak or Dead
27 Er06 Output Short Circuit
28 Er10 Inverter Over-current
29 Er11 UPS Overheat
30 Er12 UPS Output Overloading
31 Er15 Fan Error
32 Er16 Wrong Procedure to Enter Maintenance Mode
33 Er17 Output Parameters Set Error in Parallel System
34 Er21
ID Numbers are in conflict in Parallel System or ID number
Error in single unit
35 Er24
Parallel communication error ( communication wire
disconnected or failure to find ID1 UPS ) in parallel system
36 Er27 CVCF mode with Bypass input
37 Er28
The UPS must be operated in normal mode in parallel
system
38 Er31 Bypass Overload Time out and cut off output.
39 Er**
The settings of both control board and driver board are not
matched each other.
*The specified modes include Normal mode, ECO mode, CVCF mode, etc..