inform DSP FLEXIPOWER SERIES, User Manual

Page: 9 / 52

4
3. REQUIREMENT
3.1. Transportation
3.2. Placement

UPS is not designed for outdoor application.

The equipment and the batteries should not be exposed to direct sunlight or placed near to a
heat source.

Recommended operating temperature and humidity values are listed on the Appendix-2
Technical Specifications section. To provide the required enviromental condition.

Avoid dusty environments or areas where dust of conductive or corrosive materials is present.

The connection and the circuit breakers are at the back side of UPS. Leave at least 30 cm at the
back side of the UPS for maintenance.

Air outlets of the UPS are present on the front and back sides. Leave at least 30 cm at the front
and back side of the UPS for ventilation.

To eliminate any overheating of the UPS, keep all ventilation openings free from obstruction,
and do not store "things" on top of the UPS.

Even though the operating temperature of the UPS and batteries are between 0-40 °C, It is
suggested to provide an environment temperature between 20-25°C to get maximum
performance from the UPS and batteries.

Adviced Environmental humidity condition is between 30% 90% (non-condensing).
The UPS must be placed and stand in a vertical position throughout the transportation.
Use suitable equipment to remove the UPS from the pallet.
The equipment shall be packed properly during transportation. Therefore it is recommended
to keep the original package for feature need.
All packing material must be recycled in compliance with the laws in force in the country
where the system is installed.