X2 Service Manual
24
Lamp and Lamp Door
The
lamp door
505-1841-xx) fits over the lamp cavity in the projector. A pin on the lamp door closes the
safety switch on top of the lamp housing when the door is shut.
The
lamp module
(SP-LAMP-018) consists of a metal housing and enclosed reflector assembly and arc
tube. Air flow from the 80 mm fan passes through openings on two sides of the lamp module. Screens
over these openings provide air filtration.
CAUTION
The lamp module gets very hot during operation. Allow the lamp to cool for 30 minutes before
handling it.
To remove the lamp door, insert a small flat-blade screwdriver into one of the recesses at the top of
the door. Gently pry the top of the door away from the projector. The door detaches from the
projector.
5
Squeeze the locking tab on the lamp cable connector and unplug it from the connector inside the
lamp housing.
Summary of Contents for X2 multi-use perfomance
