InFocus TD61, User Manual

Page: 22 / 102

20
2.4 Connecting Source Cables
All of the
TD61
signal inputs are on input modules housed in an electronic cage assembly accessible
from the left side of the
TD61
.
Analog and Digital Connectors
There is one analog 15-pin VGA type connector
and one standard M1 connector as data inputs to the
TD61. The M1 connector also doubles as a second
analog connector when used with a VGA to
M1adapter.
The TD61 will accept a wide range of computer
resolutions up to UXGA (1600x1200). These connec-
tors are also used for RGB video with separate H&V
sync, composite sync, or sync on green and HDTV.
Video Connections
The TD61 has three video inputs: Composite
video on a yellow RCA connector, S-Video on a 4-pin
DIN connector and Component video on red (Pr),
green (Y) and blue (Pb) RCA connectors.
All three are compatible with NTSC, PAL and
SECAM.
Audio Connections
There are three stereo audio inputs using RCA
connectors. There is one stereo audio (line out) out-
put using RCA connectors and one pair of switchable
3.5mm monaural audio connectors for external
speakers. When external speakers are used the inter-
nal speakers are switched off.
Control Connections
There is one RS232 input and one RS485 input for
controlling the TD61. There is one RS485 loop
through output that is used as the loop through for
both RS232 and RS485.
Power Connection
AC power is connected to the TD61 at the bottom
left side of the display. An AC power cord is provided
in the accessory kit.
Downloaded from www.Manualslib.com manuals search engine