Copyright ©2018, Infoblox, Inc.All right reserved.
5.
6.
7.
8.
9.
10.
1.
Select a desired location and secure the rack slide brackets to the rear posts of the equipment rack with two (2) 10-32 screws on each
side of the rack.
With one person on each side, lift the appliance and position it in front of the equipment rack.
Align the chassis slider rails on the appliance with the rack slide brackets on the posts of the equipment rack.
Slide the appliance into the rack slide brackets.
Secure the rack ears to the front rack posts with two (2) 10-32 screws on each side of the rack.
Adjustable Rail Four-Post Rack Mounting
Infoblox provides an adjustable four-post rail kit with 600mm to 900mm depth adjustment, designed to allow one person to perform physical
installation of the rail kit and the appliance. This kit is provided as a field-replaceable unit. For more information, see
International AC Power
.
Cords
The adjustable rail kit is designed for tight vertical spaces on the interior of a four-post rack, allowing for appliance installation in restricted rack
spaces, including 2U of available rack space. The figure below shows a rail assembly.
Sliding Rack Rail assembly
The adjustable rack rail kit includes the following items for installation:
Eight (8) Flat-head beveled 8/32” screws that attach rail pieces to the appliance chassis
Eight (8) Phillips-head 10/32” screws for affixing the rack rails to the four-post rack
The technician must provide four attachable cage nuts for adapting the square mounting holes on the rear posts of the four-post rack to accept
the 10/32” screws.
To install the adjustable rail kit, do the following:
Install the cage nuts in the rear rack posts in the desired location, as indicated in the figure below:
Install cage nuts on the rear posts of the designated rack space
