24
25
VANGUARD ASSEMBLY INSTRUCTIONS
SHROUD ASSEMBLY CONTINUED
NOTE:
If you are not installing shrouds you should have performed
Step K2
on pages
22 and 23. Proceed to pages 26 and 27 for placard and accessory installation. Then
proceed to pages 28 and 29 for cable adjustment.
NOTE:
Some of the screws and washers are pre-installed in the frame. Some screws
and washers may be found in the shroud kit with the shrouds and shroud brackets. If
you are installing shrouds the Upper and Lower Shroud Brackets should have been
installed on
page 9
of these instructions.
L1.
Attach the Small Curved Shroud first to the Vertical Tube using 2 – 3/8” x 1 ¾” bolts,
4 – 3/8” washers, 2 – 3/8” nuts, 5 – ¼” x ¾” screws and 5 – ¼” washers. Then
attach the other side of the shroud to the Upper and Lower Shroud Brackets using 2
– ¼” x ¾” screws and 2 – ¼” washers.
L2.
Attach the Small Flat Shroud to the Main Frame behind the Press Arm using 6 – ¼”
x ¾” screws and 6 – ¼” washers. Attach the Small Flat Shroud to the Upper and
Lower Shroud Brackets using 2 – ¼” x ¾” screws and 2 – ¼” washers.
24
1 - Small Curved Shroud*
7 - 1/4" x 3/4" Screws(2*)
7 - 1/4" Washers(2*)
2 - 3/8" x 1 3/4" Bolts*
4 - Washers*
2 - Nuts*
1 - Flat Shroud*
8 - 1/4" x 3/4" Screws(2*)
8 - 1/4" Washers(2*)
VIEW FOR OPPOSITE BUILD
Remove extra screws
before installing shrouds
VIEW WITH SHROUD
OMITTED FOR CLARITY
L2
L1
*ITEM IS IN SHROUD BOX
25
1 - Small Curved Shroud*
7 - 1/4" x 3/4" Screws(2*)
7 - 1/4" Washers(2*)
2 - 3/8" x 1 3/4" Bolts*
4 - Washers*
2 - Nuts*
1 - Flat Shroud*
8 - 1/4" x 3/4" Screws(2*)
8 - 1/4" Washers(2*)
VIEW FOR OPPOSITE BUILD
Remove extra screws
before installing shrouds
VIEW WITH SHROUD
OMITTED FOR CLARITY
L2
L1
*ITEM IS IN SHROUD BOX
25