36cm
21
Cleaning the Roller Brush
Hair and other stringy items can get caught in the roller brush over time.
1.Make sure the power to the unit is turned off.
2.Turn the QQ2 LT upside-down and place it on a flat surface with the back
of the unit facing you.
3.Remove the Roller Brush from its compartment by grabbing the left side of the
Roller Brush, and sliding it toward the right until the left side of the brush is free.
4.Lift the free end of the Roller Brush out of the compartment, then slide the
Roller Brush to the left, freeing it from the flexible insert.
5.Remove any hair, string or other debris from the roller brush to
ensure proper performance of the unit.
6.With the Roller Brush removed, loosen any dirt that has accumulated in the
Roller Brush compartment with a brush, then dump the dirt into a trash can.
7.Re-install the roller brush following the steps outlined in Roller Brush
Installation and Removal Section.
Useful Tips
Clear the area where the QQ2LT is to clean of any items can
be easily knocked over, or caught with the Roller Brush or
Side Brush.
In the area where the QQ2LT operates,
it might knock over items such as vases,
glasses, or lamps.
In order to provide the QQ2LT a
space for fast and safe cleaning, please
remove small items from the area
before operating.
Do not let the loose edges of rugs, drapes, table cloths, etc to get caught in the
QQ2LT. Roll under the loose edges of rugs and make sure that any table cloths,
drapes, bedding etc do not hang down to the floor.
When the QQ2LT is cleaning rugs,
fold under the edges of the rug.
Remove plastic bags and leftover long-
shaped garbage
Adjust the distance between furniture, walls and other objects to
beat least 36 cm (14 in).
QQ2 LT Series
QQ2 LT Series
