Cleaning the QQ2 LT
Over time dust and dirt can accumulate in different areas of the unit, DO NOT
use water to clean the unit. This is an electrical unit, and if any of the
electric components get wet, the unit will no longer work, and could cause a
short circuit and potentially harm someone. Use Canned Air, the Hand Brush
provided with the unit, or a dry cloth to wipe away accumulated dust and dirt.
After operating the machine for a period of time, dust and dirt will accumulate
on the vacuum entry on the bottom of the QQ2 LT. Cleaning this area
regularly will help ensure that the unit performs properly.
1.Make sure the power of the QQ2 LT is turned off.
2.Turn the unit upside-down, and brush any dust that has accumulated inside
the vacuum entry as shown below. Shake the dust out into a trash can.
QQ2 LT Series
QQ2 LT Series
9. While the Dust Bin is removed from its compartment, turn the unit over, and
using the Hand Brush to brush any excess dust that might have accumulated in
the compartment into a trash can.
10. Once the Dust Bin and Air filter are completely dry, put the Air Filter back in
place on the Dust Bin. (Illustration 8) Then put the assembled Dust Bin and Air
Filter back into the Dust Bin compartment, with the air filter pointed away from
the control panel.
11. Put the Dust Bin Cover back in place by first inserting the tabs on the cover into
the slots on the case of the unit, then press down firmly on the edges of the Dust
Bin Cover until the Release Button clicks into place. (Illustration 10) Make
sure the Dust Bin Cover is securely in place before operating the unit.
