7
4. If the type of updating file is wrong, the following information
will come out:
Figure 3-20
At this time, re-check the updating file and camera system, or
otherwise choose other program to update.
Note:
After update successfully, it needs to restart the system.
3.8 Factory Settings
Click
button in the navigation bar to display the
following Factory Settings interface:
Figure 3-21
Click “Set” button, the following hint would display:
Figure 3-22
Click “OK”, system starts to reset to the factory default. It takes
about 90 seconds to undertake this process, when finishing, the
figure below would appear:
Figure 3-23
Click “OK” button to close the webpage.
Note:
When factory setting is finished, IP address resumes to
192.168.1.100, while subnet code resumes to 255.255.255.0.
3.9 Online Reboot
Click
button on the navigation bar to enter Reboot
interface.
Figure 3-24
Click “Reboot”, the system will be automatically re-started. And
after 60 seconds the webpage closes.
