4
Chapter III Basic Function Operation
This chapter mainly introduces the settings and operation of
V1700N IP domes.
3.1 Login
Please open IE browser after it powers on for about 50 seconds and
enter http://192.168.1.100/ (the default IP address) in the IP address
for example. Display the following user login dialog box as follow:
Figure 3-1. User Login
If this is the first time to run the software, you should enter the
default super username and password. There are two default IDs for
selection:(1)INFINOVA (password: INFINOVA); (2) Administrator
(password: Infinova). Click ‘Login’ button to log on. If the
username or password is not correct, the system will return to the
above dialog box.
Click ‘Reset’ to clear the old username and password, and then
enter the new username and password.
(1) If login as the super user, the following interface will display:
Figure 3-2. Super User Interface after Login
(2) If login as the common user, the following interface will
display:
Figure 3-3. Common User Interface after Login
User can enter system setting interface by click the button
“Settings” above the video image. While “Live Page” button helps
you switch to real-time video interface.
System setting interfaces of super and common user are shown as
follows:
Figure 3-4. Setting Interface for Super User
Figure 3-5. Setting Interface for Common User
Super user can perform the following functions: browsing system
information, user management (add/delete user, change password),
dome address/protocol/ baud rate setting, network setup, time-zone
settings, long-distance upgrade, factory settings and system reboot.
Common user can view system information, change his own
password and browse network settings but cannot modify the
settings.
