161
Infinity Chimp Series
Infinity Chimp Series
Recording Presets
If you record a preset into any of these preset pools within the preset widget, the console will only record
values for the appropriate attribute group. This way, Position Presets only contain position information,
and Color Presets only contain color information.
In case you would like to store a preset that contains parameters spread across different parameter
groups, record an “All” Preset.
Record a Preset using the Preset Split Widget
Once you have made a look you would like to store as a preset, Press the [
Rec
] key found in the
programming section of the frontpanel and select an empty item from a Preset Split Widget.
Please note Chimp will only store values for the fixtures that have been touched – so if you recorded a
color preset for one fixture, this particular preset may not be recalled using a different fixture.
The record toolbar contains a button called
Name It!
– If this button is active, the console will
automatically ask for a name after you stored the Item.
If you decide to turn this function off, you may label any item by pressing the
[Name]
key on the
faceplate of the console. The commandline will read “Name”. Now select the Item you would like to
label.
