223
Infinity Chimp Series
Infinity Chimp Series
Known Limitations
Multi Console Networking has the following known limitations:
●
When establishing a network session playback data (running cuelists, etc) from the Master console is
not synced with the Backup Console. For playback data to be in sync between both consoles, the
Master Console will switch off all running playbacks when the network session is initiated.
●
While in a network session, fixtures can not be added or deleted. This needs to be done on the
Master Console before establishing the network session. Fixture Settings (including Patch) however
can be changed during a network session.
●
Midi/Sound/Timecode/DMX Input are not transmitted on the network from the Master Console to the
Backup Console. You need to make sure that the Backup Console is receiving the same data on its
hardware inputs as the Master Console. Otherwise Show data might differ (for example learn
timecode might not work as expected).
●
The functions "Open", "Save As" and "Delete" are disabled in the Backup Menu during a network
session.
●
If different console types are used, ie. Chimp 100 and Chimp 300 the number of universes output
depends on each console type. This means that the Chimp 100 will still only output 2 universes, while
the chimp 300 may output all 4 universes. You may increase the universe count using the Dongle,
Sidekick or Peanut box.
It is recommended that all consoles in a network session are capable of outputting the same amount
of universes.
Requirements for establishing a Tracking Backup Session
The following requirements must be met to run a network session:
●
Both Consoles need to be running the same software version.
●
Both Consoles have set IP addresses and must be on the same subnet (e.g., 10.0.0.1 and 10.0.0.2;
both subnets 255.0.0.0).
●
Both Consoles are linked with Gigabit Ethernet (100MBit or Wifi might connect but will not work
reliably!).
●
They can be linked using a direct cable connection between both consoles and through a network
switch (Also, the switch must be a Gigabit Switch.
●
Make sure to use properly shielded Cat5 or Cat6 network cable!
●
The Master Console has a show open
