P a g e
| 9
LT 7602 Issue No2 (07/17)
480 HD USERS INSTRUCTIONS
Cleaning The 480 HD Appliance.
Ensure the appliance is cold before proceeding.
The outer metal work frame should be cleaned using a damp cloth.
To clean the glass panel, remove the two fixing covers and the two M4 nuts fixing the glass
clamp to the glass panel. (See Fig 8). With the nuts removed, pull the glass clamp clear of the
four studs. Finally lift the glass panel out of the bottom glass fixing.
Using a damp cloth and warm soapy water will remove a majority of stains. For more
substantial marking we recommend the use of ceramic hob cleaner. These are available
from all leading super markets. The brands of hob cleaner we have tested and found
suitable are “Hob brite” & “Bar Keepers Friend”. Ensure the glass is dry and re-assemble,
being careful not to over tighten the glass as this will cause breakages.
Note- Never operate the appliance when the glass panel is removed or broken. The glass may discolour
quickly when first installed, and it should be cleaned. This is due to the burning of the refractory fuel bed
shapes.
Fixing cover slides over the top of the fixing bracket and hooks over the back of the bracket
Summary of Contents for 480HD
