Infinity 480HD, Instruction For User, Installation & Servicing

Page: 47 / 64

P a g e | 46
LT 7602 Issue No2 (07/17)
480 HD INSTALLATION INSTRUCTIONS
Non reflective glass option.
The non-reflective glass has no print on the glass due to this there is a inner frame provided to
be fitted before the glass panel.
Slide the inner frame into the glass channel and push in to place ensuring the tabs are sitting
on top of the firebox(see below) ensure the frame is central and there is a even gap either
side of the frame (between the side of the firebox and the tabs of the frame)
Slide the glass in front of the frame and push in to place making sure that the glass is pushed
in to the glass channel properly and sits in the bottom of it and that the inner frame is still
central.
Position the top fixing bracket over the top edge of the glass panel and slide over the two
M4 studs.
Using the two M4 nuts previously removed. Tighten the top glass fixing using the nut runner
provided with the appliance being careful not to over tighten the glass as this will cause
breakages.
Make sure that the gap
here is the same on both
sides of the frame
Make sure that the glass is
sat in the bottom of the
glass channel
Push the glass in to place
so it sits flat against the
frame