Infinite Play TINF4.POE, User Installation And Operation Manual

Page: 9 / 32

INFINITE PLAY
9 EN
and saturation.
4. In volume adjustment, click left mouse button to turn up and down the volume.
5. In the bottom of the playback page, click the time-table (start time) could choose specific time to
playback . Click “+” button , could amplify the time table (range is an hour) , click “-” could
reduce the time table.
6. Keyboard control, click left button to select the numbers ,letters, symbol, clear, space,enter etc
input of soft keyboard. (Click the “Caps” of soft keyboard, then the letter is capital letter; click
the Esc, exit menu of soft keyboard)Click “English” or “Tab” button could shift input status
between Chinese and English. Chinese status display “Chinese”.

Double click mouse left button:
1. In preview , playback , single or multi picture display switch page , double click mouse button
could open the soft keyboard.

Click right mouse button to drag:
1. The area setting of shield and motion detection.Drag the slider could change
brightness ,contrast and saturation in video adjust.Volume.
2.4 Menu operation manual:
2.4.1 Menu selection:
Menu Simple instruction
Playback Playback When enter into playback interface, inquiry the recording and playback.
Backup
management
Backup
management
Format the storage device, inquiry the recording files and backup.
Recording setting
Recording
specification
1. Channel selection: display online device.
2. Bitrate selection: Local streaming, network streaming.
3. Streaming type: VBR and CBR mode.
4. Quality of video: Highest, higher, high, medium, lower, lowest.
5.Resolution: 1080P.720P.D1.VGA.CIF.QCIF etc. 6.
Video frame: 5-30.
7. Audio streaming: with audio and without audio.
8. Bitrate:128K,256K,512K,1M,1.5M,2M,3M,4M,6M,8M.
9. Pre-record time:5-30 s.
10. Delay record time:5-30s.
11. Digital watermark.
12. Copy: copy the current channel to all or other channels.
Recording
specification
1. Recording time mode
：
display the record mode for different week,time
setting.(Blue color as schedule record, yellow color as motion detect, red
color as alarm, green color as manual ).
2. Setting--time bar:click the time as valid time.
3. Time schedule--all/week(only could select any of them)--24 hours
record/set 8 time schedule Max.
Alarm Setting
Motion Detection
(Time Setting)
1. Select Channel.
2. Motion Detection Schedule: Select a different channel, display the
relative. schedule setting, yellow for motion detection.