INFINITE PLAY
21
EN
3.6.3 PTZ settings
1. PTZ setting
After logging in, the “System Settings” -> “PTZ Settings”, to enter the PTZ Setting interface,
PTZ protocol, address code .(the PTZ address code and channel number is one-to-one as default, that is,
the PTZ address code of first channel connected is 1, as below left picture: Note: dome protocol, baud
rate, address code should be in accordance with the dome settings)
2. PTZ Control
In the Mail menu, select PTZ control options,to enter the PTZ control interface; keep pressing
PLAY (put) button on front panel, to run the PTZ feature and enter the PTZ control, right as follow picture:
Notice: after enter PTZ control of the channel, it will show only this channel's picture.
Left arrow button: control the PTZ rotation of eight direction.
Speed: rotation speed, 0-360°/S;
Preset position setting: click shift button, preset as below image, first, choose the channels you want
to set, input 0-255, click preset, then it valid.
Sequence setting: click the sequence button, as below picture, can sequence for 16 preset-sequence,
preset range for 0-255, sequence fir 1-99s.
