Infinite Play TINF4.POE User Installation And Operation Manual Download Page 31

Page: 31 / 32

INFINITE PLAY

03: How to make monitor display the best image?

03: (1) Please adjust camera. (2) Please adjust the monitor video parameter. (3) Please adjust the host

device video parameter.

04: Why the video image twisted or cannot fill the whole screen?

04: (1) If have the twisted issue, please refer to monitor user guide.Please adjust it as “barrel-shape”,

“pillow”, “trapezoid”, “parallelogram” and rotate function in the monitor to the best displaying. (2) If cannot

fill the whole screen, please use “Window zoom” and “vertical/horizontal adjustment” to adjust it. (3)

Please adjust the resolution in NVR menu “System Setting->General Setting” to change the resolution.

05: Why the monitor display color cast?

05: (1) Please check if the connection between main-board and VGA/HDMI interface are OK. And check

if the connect line itself are OK. (2) Please check if the host heat dissipation is OK.

06: If one channel display black screen and has no channel name NVR boot up, how to solve it?

06: (1) Please check your IPC setting.Some IPC has no OSD displaying. (2) Please check if it has been

set full mask.

07: Why there has mosaic when playing host video record?

07: (1) The high bitrate in recording parameter in NVR host will cause the mosaic issue. (2)If HDD has

damaged section, it will has mosaic.

Summary of Contents for TINF4.POE

































Search results

Summary of Contents for TINF4.POE

Reviews:

Related manuals for TINF4.POE

Brands by name

Popular brands

Infinite Play TINF4.POE, User Installation And Operation Manual

Search results

Summary of Contents for TINF4.POE

Reviews:

Related manuals for TINF4.POE

Brands by name

Popular brands