Infinique Econo Series, Operating Instruction

Page: 59 / 63

59
NOTE:

The PRESET-positions are set by PRESET menu [MENU

SETUP

CAMERA

PRESET]

The SCAN-lists are set by SCAN-POINT menu [MENU

SETUP

CAMERA

SCAN-POINT]
OSD MENU
If you click OSD MENU icon in case that Camera itself has OSD function, The OSD will be
shown in accordance with Camera’s OSD. If OSD is not supported by Camera, OSD MENU does
not work.
4.4.2 Audio
4.4.3. SPOT
COMPOSITE The video is displayed as Composite
SINGLE CHANNEL Selected one CH screen is displayed
SINGLE SEQUENCE One CH is sequenced
QUAD 4CH screen is displayed.
The Quad channel can be selected.
QUAD SEQUENCE Quad screen is sequenced
MODE 9 9 CH screen is displayed
MODE 16
16CH screen is displayed. (just in 16CH)
4.4.4 LOG VIEW
System log status can be found or saved into USB memory to check on PC.
Before using this function, make sure audio in/out
device has been installed correctly. (Refer to page
 Audio out works only in 1CH full screen mode

Test audio by TEST ON/OFF button