Infinique Econo Series, Operating Instruction

Page: 23 / 63

23
- If you press a numeric key of remote control which is outside of current display range, the
quad containing selected numeric will be displayed.
E.g. you press 6 while current screen shows CH1~Ch4, CH5~CH8 will be displayed.
3.4.3 Channel Display Mode for 8 or 16 Channel DVR
- To see cameras by 9ch mode, press button.
- If you press a numeric key of remote control which is inside current display range, selected
channel is displayed as full screen mode.
- If you press a numeric key of remote control which is outside of current display range, the nine
screens containing selected numeric will be displayed.
3.4.4 Channel Display Mode for 16 Channel DVR
- To see camera by 16ch mode, press button.
3.4.5 POP mode: Only for 8/16 Channel
- Press POP button to enlarge specific camera with 7 other cameras.
- By pressing POP button again, the biggest screen will change.
3.4.6 OSD Hide or Show
- Press OSD button of remote control if you want to see or hide OSD.
- You can set permanent hide status in SETUP menu [SETUP

DISPLAY

OSD]

When there is no command into DVR, status bar will be hidden. When you press
any button or click by mouse, Status bar will be shown again.
3.4.7 PIP mode (picture in picture)
In case of full screen display mode, you can see the other camera in a small window.
1 CAM01 2 CAM02
3 CAM03 4 CAM04
5 CAM05 6 CAM07
7 CAM07 8 CAM08
6
OSD button