Infinique Econo Series, Operating Instruction

Page: 32 / 63

4.2.2.4. Preset
CAMERA
Select PTZ camera to set up preset position : PTZ camera should be
connected.
PAGE
If more site is needed, please go to next page.
NAME Preset position name can be written by virtual key board
SET Move camera focus to the postion and save the position
CLE Clear the preset
CLEAR ALL Clear all of preset .please be careful when it is used.
Please follow the below steps to settle the preset.
1. Select PTZ camera to settle preset in camera.
2. Press “SET” ICON to pop up PTZ control window
3. Move camera to desired point by using Pan, tilt and Zoom in and out button.
4. Click Advance icon or Press ENTER Key in remote controller to save.
5. Click any other position on screen by mouse or press MENU Key to cancel.
If you like to cancel the setting, please click the CLE icon of the channel will be cleared.
If you click “CLEAR ALL” button, all value of channels will be cleared.
NOTE : Before using this function, please make sure that camera supports preset.
Total 64 preset points can be saved to each channel.
You can enter position name to each saved preset position.
4.2.2.5. TOUR