InfiNet Wireless Quanta 5, Technical User'S Manual

Page: 51 / 100

Quanta 5
Quanta 5 Technical User Manual
51
Step 1: Insert the sealing insert into the clamping claw.
Step 2: Assemble the cable gland by putting the thread-lock sealing nut, clamping claw
with sealing insert and body onto the cable as shown on the figure.
Step 3: Insert the clamping claw with sealing insert into the body as shown on the figure.
Step 4: Crimp the standard RJ-45 connector onto the cable using crimping tool. Pin-out
scheme: T568B wiring standards.
Step 5: Insert the Rj-45 connector into the corresponding socket until you hear a click.
Step 6: Screw the cable gland body into the port and tighten it. Do not apply excessive
force.
Step 7: Tighten the thread-lock sealing nut. Do not apply excessive force.
CAUTION
Make sure that the RJ-45 connector is well-crimped. A loose connector can damage
the device. Please note that such damage is not covered by the warranty.
NOTE
For connection to "ETH IN" terminate the cable with the standard RJ-45 connector
(4) according to the EIA/TIA-568B.
For connection to "ETH OUT" terminate the cable with the shielded RJ45 connector
(5) according to the EIA/TIA-568B (to provide grounding circuit).