Infineon TRAVEO T2G family CYT4D Series Page 40 Manual Download | Manualshive

Page: 40 / 80

background image

Application Note

40 of 80

002-26071 Rev. *B

2021-09-07

Clock configuration setup in TRAVEO™ T2G family CYT4D series MCUs

Configuration of the FLL and PLL

Code Listing 28

Cy_SysClk_Pll400MConfigure() function

cy_en_sysclk_status_t Cy_SysClk_Pll400MConfigure(uint32_t clkPath, const cy_stc_pll_400M_config_t *config)
{

/* check for error */

  uint32_t pllNo;
  cy_en_sysclk_status_t status = Cy_SysClk_GetPll400MNo(clkPath, &pllNo);
  if(status != CY_SYSCLK_SUCCESS)
  {
  return(status);
  }

  if (SRSS->CLK_PLL400M[pllNo].unCONFIG.stcField.u1ENABLE != 0ul)

/* 1 = enabled */

  {
  return (CY_SYSCLK_INVALID_STATE);
  }

  cy_stc_pll_400M_manual_config_t manualConfig = {0ul};
  const cy_stc_pll_limitation_t* pllLim;
  uint32_t fracBitNum;
  if(config->fracEn == true)
  {
  pllLim = &g_limPll400MFrac;
  fracBitNum = 24ul;
  }
  else
  {
  pllLim = &g_limPll400M;
  fracBitNum = 0ul;
  }
  status = Cy_SysClk_PllCalucDividers(config->inputFreq,
     config->outputFreq,
pllLim,
fracBitNum,
&manualConfig.feedbackDiv,
&manualConfig.referenceDiv,
&manualConfig.outputDiv,
&manualConfig.fracDiv
);
  if(status != CY_SYSCLK_SUCCESS)
  {
  return(status);
  }

  manualConfig.outputMode = config->outputMode;
  manualConfig.fracEn = config->fracEn;
  manualConfig.fracDitherEn = config->fracDitherEn;
  manualConfig.sscgEn = config->sscgEn;
  manualConfig.sscgDitherEn = config->sscgDitherEn;

  manualConfig.sscgDepth = config->sscgDepth;
  manualConfig.sscgRate = config->sscgRate;

status = Cy_SysClk_Pll400MManualConfigure(clkPath, &manualConfig);
return (status);
}

Code Listing 29

Cy_SysClk_Pll400MManualConfigure() function

cy_en_sysclk_status_t Cy_SysClk_Pll400MManualConfigure(uint32_t clkPath, const cy_stc_pll_400M_manual_config_t
*config)
{

/* check for error */

  uint32_t pllNo;
  cy_en_sysclk_status_t status = Cy_SysClk_GetPll400MNo(clkPath, &pllNo);
  if(status != CY_SYSCLK_SUCCESS)
  {
  return(status);
  }

/* valid divider bitfield values */

  if((config->outputDiv < PLL_400M_MIN_OUTPUT_DIV) || (PLL_400M_MAX_OUTPUT_DIV < config->outputDiv))
  {
return(CY_SYSCLK_BAD_PARAM);
  }

  if((config->referenceDiv < PLL_400M_MIN_REF_DIV) || (PLL_400M_MAX_REF_DIV < config->referenceDiv))
  {
return(CY_SYSCLK_BAD_PARAM);
  }

Check for valid clock path and PLL400
number. See

Code Listing 30

(1) Check if PLL400 is already enabled.

PLL400 manual configuration. See

Code Listing 29

Get the PLL400 PATH number. See

Code Listing 30

«
...
38
39
40
41
42
...
»

Summary of Contents for TRAVEO T2G family CYT4D Series

















































































Reviews:

No comments

Related manuals for TRAVEO T2G family CYT4D Series

Brand: La Crosse Technology Pages: 8

Brand: Bigben Pages: 84

Brand: Bodet Pages: 36

Brand: La Crosse Technology Pages: 12

Brand: Trevi Pages: 8

Brand: Silvercrest Pages: 10

Brand: Silvercrest Pages: 14

Brand: Silvercrest Pages: 12

Brand: Silvercrest Pages: 24

Brand: Silvercrest Pages: 28

Brand: Silvercrest Pages: 62

Brand: Silvercrest Pages: 66

Brand: Silvercrest Pages: 98

Brand: Silvercrest Pages: 126

Brand: Silvercrest Pages: 134

Giant-Digits 1087

Brand: Traceable Pages: 5

Brand: Chelsea Pages: 12

Brand: Venturer Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands