manualshive.com logo in svg

Infineon TRAVEO T2G family CYT4D Series, Manual

The Infineon TRAVEO T2G family CYT4D Series offers high-performance microcontrollers packed with advanced features. Unlock the full potential of your device with our comprehensive user manual. Easily accessible for free download at manualshive.com, this manual provides step-by-step instructions and helpful insights, ensuring a seamless experience with your product.

Share
Download
background image

  

Application Note 

41 of 80 

002-26071 Rev. *B  

 

 

2021-09-07 

Clock configuration setup in TRAVEO™ T2G family CYT4D series MCUs

 

 

Configuration of the FLL and PLL 

 

Code Listing 29

 

Cy_SysClk_Pll400MManualConfigure() function 

    if((config->feedbackDiv  < PLL_400M_MIN_FB_DIV) || (PLL_400M_MAX_FB_DIV < config->feedbackDiv)) 
    { 
         return(CY_SYSCLK_BAD_PARAM); 
    } 
 
    un_CLK_PLL400M_CONFIG_t tempClkPLL400MConfigReg; 
    tempClkPLL400MConfigReg.u32Register = SRSS->CLK_PLL400M[pllNo].unCONFIG.u32Register; 
    if (tempClkPLL400MConfigReg.stcField.u1ENABLE != 0ul) 

/* 1 = enabled */

 

    { 
        return(CY_SYSCLK_INVALID_STATE); 
    } 
 

    /* no errors */ 
    /* If output mode is bypass (input routed directly to output), then done. 
       The output frequency equals the input frequency regardless of the frequency parameters. */

 

    if (config->outputMode != CY_SYSCLK_FLLPLL_OUTPUT_INPUT)

 

 

    { 
        tempClkPLL400MConfigReg.stcField.u8FEEDBACK_DIV    = (uint32_t)config->feedbackDiv; 
        tempClkPLL400MConfigReg.stcField.u5REFERENCE_DIV   = (uint32_t)config->referenceDiv; 
        tempClkPLL400MConfigReg.stcField.u5OUTPUT_DIV      = (uint32_t)config->outputDiv; 
    } 
    tempClkPLL400MConfigReg.stcField.u2BYPASS_SEL          = (uint32_t)config->outputMode; 
    SRSS->CLK_PLL400M[pllNo].unCONFIG.u32Register          = tempClkPLL400MConfigReg.u32Register; 
 
    un_CLK_PLL400M_CONFIG2_t tempClkPLL400MConfig2Reg; 
    tempClkPLL400MConfig2Reg.u32Register               = SRSS->CLK_PLL400M[pllNo].unCONFIG2.u32Register; 
    tempClkPLL400MConfig2Reg.stcField.u24FRAC_DIV      = config->fracDiv; 
    tempClkPLL400MConfig2Reg.stcField.u3FRAC_DITHER_EN = config->fracDitherEn;

 

 

    tempClkPLL400MConfig2Reg.stcField.u1FRAC_EN        = config->fracEn; 
    SRSS->CLK_PLL400M[pllNo].unCONFIG2.u32Register     = tempClkPLL400MConfig2Reg.u32Register; 
 
    un_CLK_PLL400M_CONFIG3_t tempClkPLL400MConfig3Reg; 
    tempClkPLL400MConfig3Reg.u32Register               = SRSS->CLK_PLL400M[pllNo].unCONFIG3.u32Register; 
    tempClkPLL400MConfig3Reg.stcField.u10SSCG_DEPTH    = (uint32_t)config->sscgDepth; 
    tempClkPLL400MConfig3Reg.stcField.u3SSCG_RATE      = (uint32_t)config->sscgRate; 
    tempClkPLL400MConfig3Reg.stcField.u1SSCG_DITHER_EN = (uint32_t)config->sscgDitherEn; 
    tempClkPLL400MConfig3Reg.stcField.u1SSCG_EN        = (uint32_t)config->sscgEn; 
    SRSS->CLK_PLL400M[pllNo].unCONFIG3.u32Register     = tempClkPLL400MConfig3Reg.u32Register; 
 
    return (CY_SYSCLK_SUCCESS); 
}

 

 

Code Listing 30

 

Cy_SysClk_GetPll400MNo() function 

__STATIC_INLINE cy_en_sysclk_status_t Cy_SysClk_GetPll400MNo(uint32_t pathNo, uint32_t* pllNo) 
{ 

    /* check for error */ 

    if ((pathNo <= 0ul) || (pathNo > SRSS_NUM_PLL400M)) 
    { 

        /* invalid clock path number */ 

        return(CY_SYSCLK_BAD_PARAM); 
    } 
 
    *pllNo = pathNo - 1ul; 
    return(CY_SYSCLK_SUCCESS); 
}

 

 

Code Listing 31

 

Cy_SysClk_PllCalucDividers() function 

__STATIC_INLINE cy_en_sysclk_status_t Cy_SysClk_PllCalucDividers(uint32_t  inFreq, 
                                                                 uint32_t  targetOutFreq, 
                                                                 const cy_stc_pll_limitation_t* lim, 
                                                                 uint32_t  fracBitNum, 
                                                                 uint32_t* feedBackDiv,  
                                                                 uint32_t* refDiv,  
                                                                 uint32_t* outputDiv, 
                                                                 uint32_t* feedBackFracDiv) 
{ 
    uint64_t errorMin = 0xFFFFFFFFFFFFFFFFull; 
 
    if(feedBackDiv == NULL) 
    { 
        return (CY_SYSCLK_BAD_PARAM); 
    } 
 
    if((feedBackFracDiv == NULL) && (fracBitNum != 0ul)) 

(3) Fractional divider settings

 

(4) SSCG settings

 

(2) PLL400 configuration

 

Summary of Contents for TRAVEO T2G family CYT4D Series

















































































Reviews:

No comments

Related manuals for TRAVEO T2G family CYT4D Series

Hama RC300 Operating Instructions Manual preview
RC300
Brand: Hama Pages: 52
Hama RC300 Operating Instruction preview
RC300
Brand: Hama Pages: 16
HoMedics SS-4500 Instruction Manual preview
SS-4500
Brand: HoMedics Pages: 10
Tivoli Audio IYIYI Owner'S Manual preview
IYIYI
Brand: Tivoli Audio Pages: 56
iHome POWERCLOCK IBT235W Instructions Manual preview
POWERCLOCK IBT235W
Brand: iHome Pages: 11
TFA 60.2531 Instruction Manual preview
60.2531
Brand: TFA Pages: 48
Hama Cube 00186304 Operating Instructions Manual preview
Cube 00186304
Brand: Hama Pages: 96
Clatronic MRC 832 P Instruction Manual preview
MRC 832 P
Brand: Clatronic Pages: 74
Wisoee JS2712A Instruction Manual preview
JS2712A
Brand: Wisoee Pages: 2
Trevi RC 80D4 DAB User Manual preview
RC 80D4 DAB
Brand: Trevi Pages: 36
TFA DESIGN 98.1049 Operating Instructions preview
DESIGN 98.1049
Brand: TFA Pages: 2
iHome HDL95 Quick Start Manual preview
HDL95
Brand: iHome Pages: 8
iHome IM14 Instruction Manual preview
IM14
Brand: iHome Pages: 17
Levenhuk Wezzer Tick H50 User Manual preview
Wezzer Tick H50
Brand: Levenhuk Pages: 29
Naxa NRC-182 Instruction Manual preview
NRC-182
Brand: Naxa Pages: 16
NAF NAF Electronique DNI065 User Manual preview
DNI065
Brand: NAF NAF Electronique Pages: 14
Onida ON-1204CR User Manual preview
ON-1204CR
Brand: Onida Pages: 3
La Crosse Technology WT-62U Manual preview
WT-62U
Brand: La Crosse Technology Pages: 3

Brands by name

Popular brands

Load more brands