>
>
Data output > Files (Tab)
Start IRwin App on your computer
Select the serial number of your detector in “Port” drop down menu. If not found,
check setting of Bluetooth interface and repeat paring sequence if necessary.
Click “Connect” in IRwin App.
Select tab “File” in the graphic window in IRwin App.
Select the file to transfer. You can only transfer one file at the time.
Click “Download File” in IRwin App.
IRwin App will confirm when file is transferred.
To delete a file, select the file in the IRwin App and click “Delete File”. Re-enter the file list in IRwin to
confirm that the file is deleted.
NOTICE
Avoid transferring files while performing a GC Ethane Analysis as this can severely
affect the GC analysis.
5.3.4 Real-time streaming from leak detector to computer
You have installed IRwin App software on your computer.
You have activated the Bluetooth interface on your computer.
Switch on the leak detector.
Perform self-test.
1
7
4
5
6
7
8
9
10
11
12
1
2
Set the leak detector in the desired mode. This must be one of the following
operating modes: Bar Hole,
Gas Purity, House, Above Ground or Confined Space. Bluetooth is active in all these modes.
Select the serial number of your leak detector in “Port” drop down menu. If not
found, check setting of
Bluetooth interface and repeat paring sequence if necessary.
Click “Connect” in IRwin App.
Select tab “Live” in the graphic window in IRwin App.
Click “Start Streaming” in IRwin App.
The measurement data is now presented as a graph.
3
4
5
Start IRwin App on your computer.
6
7
8
