tina46e1-b (2017-12) BPG402.om
15
Place the electronics unit (2) on the sensor (3) (be careful to correctly align
the pins and notch (4)).
4
3
2
Slide the electronics unit in to the mechanical stop and lock it with the hexa-
gon socket set screw.
In severely contaminating processes and to protect measurement electrodes opti-
cally against light and fast charged particles, replacement of the built-in grid by the
optional baffle (
→
47) is recommended.
Gauge deinstalled
("Deinstallation"
→
41).
•
Baffle
(
→
47)
•
Pointed
tweezers
•
Pin (e.g. pencil)
•
Screwdriver No 1
Carefully remove the grid with tweezers.
Installing the electronics unit
3.1.2 Using the Optional Baffle
Precondition
Required tools / material
Installation
