INF
ANT
WITH INBUIL
T HARNESS
SELECTION OF APPROPRIATE PADDING COMBINATIONS
Determine whether your infant/child requires the additional padding provided with this restraint, to
ensure a safe and snug fit in the restraint. Refer to page 6 for suggested padding combinations.
To ensure baby’s back is evenly supported, do not put more than one nappy on the baby and
make sure the nappy is not thickly folded at the back.
WARNING
!
- Refer to the shoulder height labels
(As shown on pages 9).
- For correct shoulder strap slot
height refer to page 13.
IMPORTANT
!
At the front of the restraint is a red
lever. Pull red lever forward and slide
seat forward as far as possible (seat
back should be laying back).
Ensure the recline section is swung
forward (see Figure 1).
Ensure the In-built harness “Shoulder
straps” are positioned in the lower
slots.
CONVERTING TO INFANT SEAT
RECLINED POSITION
11
Summary of Contents for CS4210
Page 47: ...NOTES...
