background image

ATTENTION!!

Read this manual carefully before installing the MicroTimer 2400!

Mains connection

Guarentee

Security

Before connecting the appliance to the mains, check that the mains supply voltage corresponds to the voltage
printed on the type plate of the adapter. If the mains voltage is different, consult your supplier.

No guarantee can be given if safety regulations are not followed.

Always disconnect the power supply before handling anything inside the device.

This device is in conformity with the EMC directive and low-voltage directive.

CE Conformité Europeène (Conform European Norm)

WEEE Directive (Waste of Electrical and Electronic Equipment)

Inepro considers it important to properly take the climate into account. We therefore produce as many
climate-friendly products. Your new device contains materials which can be recycled and then reused. At the
end of life, specialized companies can dismantle the device, to materials which can be reused in order to
recycle and reuse. For example, the materials that must be discarded will be limited to a minimum. Please
take into account the rules and regulations in your area regarding the rules about disposal of packaging
materials, exhausted bateries and old equipment. 

Thank you, Inepro BV

This device may only be used indoors.

Indoor User Only

Directives

Due to continuous product improvements this manual is subject to change without notice. This document
describes the technical and functional operation of the MicroTimer 2400. Greatest care has been taken drafting
the information in this manual and it may be said that it is reliable. However, the producer is not liable for any
shortcomings in the text or incompleteness of the information. Thank you for your decision to use the
MicroTimer 2400.

This document:

Summary of Contents for MicroTimer 2400





























Reviews: