6 - MicroTimer 2400
Possebilities
Basic functioning (without ECOS modules)
In the basic version during stand-by a point
(.) will be shown on the display.
As soon as the main time is connected the display will change into two hyphens
(--).
Time per periode (Main Time)
The maximum period of time to be programmed in the MicroTimer® is 15 minutes. The main time starts after pressing the
timer-key, after inserting a coin or by means of a continuous external drive.
Output
The MicroTimer® output is programmable. It may be chosen between the standard “continue” output, which means that
both relays are activated during main time, and a “pulse” output, which means that a pulse is generated at the beginning
and the end of the main time.
Pause
The operator may choose either to allow the creation of a pause during the main time or not. If a pause is allowed, it can
be created by pressing the Start/Pause key. The operator can also choose between interrupting and continuing the main
time during the pause mode
Summary of Contents for MicroTimer 2400
