background image

02VJ-004 rev.2

RF Pilot

Wireless remote controller with display

EN

Perenmarkt 10B, 1681PG ZWAAGDIJK-OOST ind.terrein: WFO/ABC THE NETHERLANDS

Tel: +31(0)228-567729, Fax: +31(0)228-567797, Email: info @ wardenaar.com, Internet: www.wardenaar.com

Rabobank 32 69 98 268, KvK te Alkmaar 37079598,  BTW NL 8070.48.768.B01

1/8

The User’s Manual provides information for the installation and use of the device. The Manual is always included in the package. The 
device may only be installed and connected by persons with requisite professional qualifications who have become thoroughly 
familiarized with this Manual and the functions of the device. Trouble-free operation also depends on the previous method 
of transportation, storage and handling. Should you become aware of any signs of damage, deformation, malfunction or of any 
missing parts, do not install this product and return it to the vendor. After the expiry of its service life, the product and all its parts 
must be disposed of as electronic waste. With consideration to the transmission of the RF signal, ensure that RF components are 
suitably located in the building where the device is to be installed. The RF Control system must only be installed in indoor areas. The 
device has not been designed for outdoor use or use in moist environment, it must not be installed in metal distribution boxes and 
plastic distribution boxes with metal doors as this would prevent the transmission of the radio frequency signal. RF Control is not 
recommended for the control of devices providing for vital life functions or for the control of risk devices such as lifts, pulleys etc. - 
radio frequency transmission could be hampered with an obstacle, interfered with, the transmitter battery may become depleted etc. 
thus disabling the remote control. Not suitable for use in industrial environment.

Before You Start...

Display
Type:
Resolution:
Side ratio:
Visible surface:
Backlighting:
Diagonal:
Control:
Power supply
Power supply:
Battery life:

Control
Range in free space:
Frequency:
Other data
Operating temperature:
Storage temperature:
Color design:
Protection:
Operating position:
Dimensions:
Weight:
Related standards:

Technical parameters

color OLED

128 x 128 pixels

1:1

26 x 26 mm

self-illuminating text

1.5“

direction button, control buttons

2 x 1.5 V AAA batteries / R03*

approx. 3 years, according to the 

frequency of use and battery type

up to 200 m

866 MHz, 868 MHz, 916 MHz, 922 MHz

0 to +55 °C

-20 to +70 °C

           white                     anthracite

IP20

any

130 x 41 x 18 mm

61 g

EN 60730-1

• The RF Pilot remote control is a central controller for switching electrical appliances and equipment, dimming lights, con-

trolling blinds, etc.

• When pressing the button, it sends a set signal (ON / OFF, dimming, time switching OFF / ON, blinds up / down).
• Option of setting light scenes, where with a single press, you can control up to 10 units at once.
• The Favorites mode lets you preset the most frequently used devices on the home screen.
• Option of grouping dimmers (RFDA-73M/RGB), where you can place up to 10 units under a single control panel = control 

of over 100 m of colored LED strip.

• Designed in white and anthracite with color OLED display.
• Display of room temperature, battery status, date and time directly on display.
• Bidirectional communication, transmits and receives commands and displays the status of units.
• Thanks to the function of measuring the signal between the controller and unit, you can use it for testing the range and 

signal quality.

• It is possible to combine up to 40 units of iNELS RF Control (you can gradually expand the installation from 1 unit).
• Battery power (1.5 V 2x AAA - included in supply) with battery life of around 3 years based on frequency of use and type 

of batteries.

• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater 

RFRP-20.

• Communication frequency with bidirectional protocol iNELS RF Control.

Characteristic

Overview of wireless RF Control devices

Controllers

RFWB-20/G, RFWB-40/G 

- Wireless wall controller - 2 button / 4 button

RF Key 

- 4 button controller, keychain

RF Pilot 

- Wireless remote controller with display

RFSG-1M 

- Wireless contact converter - 2 inputs

RFIM-20B, RFIM-40B

 - Wireless contact converter (2 inputs / 4 inputs)

System units

RF Touch-B, RF Touch-W 

- Wireless touch unit - fl ush / surface mounted

eLAN-RF-003 

- Smart RF box

eLAN-RF-Wi-003 

- Smart RF box with Wi-Fi

RFRP-20 

- Repeater to extend the range

RFGSM-220M

 - Energy gateway

Switches

RFSA-11B 

- Wireless switch unit (single-function) - 1 output

RFSA-61B 

- Wireless switch unit (multi-function) - 1 output

RFSA-62B 

- Wireless switch unit (fl ush mounted) - 2 outputs

RFSAI-61B 

- Wireless switch unit with the input (for a pushbutton)

RFSA-61M 

- Wireless switch unit - 1 output

RFSA-66M 

- Wireless switch unit - 6 outputs

RFSC-61 

- Switching socket (multi-function)

RFUS-61 

- Switch unit for outdoor use (multi-function)

RFJA-12B, RFJA-32B

 - Switch unit for shutters

Dimmers

RFDA-73M/RGB 

- Dimming actuator

RFDEL-71B 

- Universal dimmer (fl ush mounted)

RFDEL-71M 

- Universal dimmer (DIN rail mounted)

RFDW-71 

- Wireless Dimmer Switch

RFDSC-71 

- Dimming socket (multi-function)

RFDAC-71B 

- Analog controller 0(1)-10V

Lighting

RFSOU-1 

- Wireless twilight switch

RF-RGB-LED-550 

- Wireless coloured bulb

RF-White-LED-675 

- Wireless white bulb

Temperature control

RFATV-1 

- Wireless thermo-valve

RFSTI-11B 

- Switch unit with a temperature sensor (fl ush mounted)

RFSTI-11/G 

- Switch unit with a temperature sensor

RFTI-10B 

- Wireless temperature sensor

RFTC-10/G 

- Simple wireless temperature controller

RFTC-50/G, RFTC-100/G 

- Wireless temperature controllers

Energy management

RFPM-2M 

- Energy gateway

RFTM-1 

- Wireless pulse converter

Monitoring units

RFSF-1B 

- Wireless fl ood detector

RFSD-100, RFSD-101 

- Smoke detector wireless

RFMD-100 

- Motion detector wireless

RFWD-100

 - Window / Door detector wireless

Accessories

FP-1 

- Flood probe

TC, TZ, Pt100 

- Temperature sensors

AN-I 

- Internal antenna

AN-E 

- External antenna

Telva 

- Thermodrive

CT50 

- Current transformer

LS, MS, WS, IRS

 - LED sensor, Magnetic sensor, Infra Red sensor

* batteries are included in the package

Summary of Contents for RF Pilot









Reviews: