P.I.E. INEL Sp. z o.o.
ul. Mostowa 1
80-
778 Gdańsk
6. RCU REGISTRATION USNG ANOTHER RCU
If registered remote control is available other channels of the same or different RCU may be registered by
entering registration mode with a registered RCU:
•
Press
▲ and ▼ simultaneously on the RCU,
Red LED D2 will light and roller shutter will move up and down in a series of short movements, corresponding to the
number of registered channels. The controller remains in the registration mode for the next 10 seconds:
•
Press ▲UP button for the channel to be registered on RCU PIL-01/04NS, PIL-01/05/09/19DL,
PIL-01/05/09/19PM, PIL-19/99PMT,
•
Press the connected roller blind switch PIL-01PT.
Blink of LED D2 and roller shutter move up and down in a series of short movements, corresponding to the number
of registered channels verify correct registration.
Any channel can be registered to any controller, provided that the registered remote control is already
available.
7. ERASING RCUs FROM CONTROLLER
To clear all registered channels switch SW1 should be pressed and held until LED D2 starts to blink. After releasing
the switch, all registered channels will be cleared.
WARNING! There is no possibility to erase only one channel.
