P.I.E. INEL Sp. z o.o.
ul. Mostowa 1
80-
778 Gdańsk
2. ELECTRICAL CONNECTION
Safety guidelines:
•
Only persons with appropriate authorisation may install the controller.
•
Protect the device against contact with any liquids, impact and shock.
•
Do not connect more than one drive to the device.
WARNING! DISCONNECT POWER SUPPLY BEFORE MAKING ANY CONNECTIONS!
Wiring of motor:
↓ - motor DOWN direction wire
N
– motor COM wire
↑ - motor UP direction wire
Wiring of mains:
L - L1 (230 VAC mains)
N
– N (230 VAC mains)
3. ACTIVATING WITH TOUCH PANEL
ST-01RN has three touch fields:
▲ „ UP”
— „ STOP”
▼ „ DOWN”
Activating the blinds:
To active the motor press and release one of touch fields UP, DOWN or STOP to stop the motor.
Activating the Venetian blinds:
Press and hold “STOP” touch field and press and release “UP” or “DOWN” touch field.
4. ACTIVATING WITH RCU
Controlling with RCU is possible after registration its channel to ST-01RN.
5. RCU REGISTRATION
Before registration procedure remove external frame from controller.
Press registration button SW1 form 1 second (red LED D2 will light).
The controller remains in the registration mode for the next 10 seconds.
WARNING! Do not hold SW1 for more than 3 seconds, it will erase
all registered RCU’s.
•
PIL-01PT
Press the connected roller blind switch.
•
PIL-01/04NS, PIL-01/05/09/19PM, PIL-19/99PMT, PIL-01/05/09/19DL, PIL-19/99DLT
Press ▲UP button for the channel to be registered on RCU.
Blink of LED D2 will verify the correct registration.
