Indutherm VC 400 LCD, Instruction Manual, Page: 20 / 42

86014010_04_OPERATING_MANUAL_VC400_LCD_GB.DOC 25.11.2016 KS
page 20
4.1.3 Pre-set casting programs
VC400 /
VC500
Material Bronze Yellow
gold 14k
(with
zinc) Yellow
gold 18k
Aluminium
Brass Silver
935 Test
Crucible Graphite Graphite Graphite Graphite Graphite Graphite Graphite
Program No. 10 11 12 13 14 15 18
Temperature °C 1150 1060 1080 740 1080 1000 0010
Heating
power % 0100 0100 0100 0100 0100 0100 100
Turbo
pressure
start s 00.8 00.8 00.8 00.8 00.8 00.8 00.8
Turbo
pressure
maximum bar 1.00 1.00 1.00 1.00 1.00 1.00 0.50
Label Bronze YG 585 750/YG Aluminum Brass 935/Ag InduTest
4.1.4 VC400 modify system parameter
If you start from the start page and you press“ Program setup“ for 5 seconds you get
access to the system parameter.
On the top level shown:
000:00002
== selected parameter == 000
value of parameter 00002: equals two == type N thermocouple
If
you press “Λ” you get access to the parameter 001 and higher.
By pressing “+” you change the value of parameter 000 to 3