Indutherm VC 400 LCD, Instruction Manual, Page: 12 / 42

86014010_04_OPERATING_MANUAL_VC400_LCD_GB.DOC 25.11.2016 KS
page 12
3.3.4 Main switch with emergency stop function
It is allowed to start the machine or operation only with proper emergency stop function.
Caution!
With the emergency stop function you can stop the machine
in critical moments of health hazard. You help to diminish
potential consequences of injury.
 Don’t manipulate the emergency stop equipment.
 Don’t obstruct the way to the emergency stop equipment.
3.3.5 Safety markings placed on the machine casing
A necessary condition for safe dealing with and undisturbed running of the machine is
the knowledge of safety instructions and industrial safety regulations.
On the front of the machine casing the following safety markings are attached.
safety
marking meaning safety
marking meaning
warning of dangerous
electrical voltages wear heatresistant
safety clothing
warning of hot
surfaces
wear heat-resistant
protective gauntlet
gloves protecting
artery
forbidden for persons
with pacemaker
wear face guard
wear protective
shoes
Advice
Keep the safety markings always clean. Replace the markings
if they aren’t recognizable. Observe the warnings and
commands. Don’t expose yourself careless to dangerous
situations.