Indutherm VC 400 LCD, Instruction Manual, Page: 15 / 42

86014010_04_OPERATING_MANUAL_VC400_LCD_GB.DOC 25.11.2016 KS
page 15
Danger!
Danger for the eyes.
Always place the gold coated foil for eye protection against
thermal radiation on top of the inspection window of the
crucible chamber.
In addition wear safety goggles suitable for welding operations
.
Danger!
Danger because of touching parts conducting
voltage.
Work on the electrical equipment is only allowed for
authorized qualified staff.
Access to the electrical distribution box is only
allowed for authorized qualified staff with key or tool.
Work on the electrical equipment is only allowed
when the system is disconnected from power supply
(pull out power plug).

The capacitors can retain their charge even after
deactivation of the system.

Keep electrical distribution boxes closed
continually.

No work must be carried out on parts conducting
high voltage.

Remove loose connections.
Replace immediately damaged, scorched or
slightly burned cables. Perform work only when
mains plug is pulled out.

Cables may not wedge in or rather squeezed.
Cables have to be laid in a way that they not
become a tripping hazard or can be not
damaged.
Danger!
Threat of health injury by escape of medias from damaged
hoses. Danger of system damages.

Remove loose connections. Replace damaged hoses
immediately. Perform work only when mains plug is pulled
out.

Hoses may not wedge in or rather squeezed. Hoses have
to be laid in a way that they not become a tripping hazard
or can be not damaged.