industrie technik Evolution FH-2xxSH1 series, User Manual

Page: 48 / 142

48/142
AB Industrietechnik srl – Via Julius Durst, 70 – 39042 BRESSANONE (BZ) Italy – Tel: +39 0472/830626 – info@industrietechnik.it – www.industrietechnik.it
2. Analogue input 2 ( AI2 ):
Parameter
M10 =0
Remote control
sensor for zone 1
Sensor AI2 is used as a control sensor for zone 1.
M10
=1
Remote control
sensor for zone 2
Sensor AI2 is used as a control sensor for zone 2.
M10
=2
Remote control
sensor for zone 3
Sensor AI2 is used as a control sensor for zone 3.
M10
=3
Remote control
sensor for zone 4
Sensor AI2 is used as a control sensor for zone 4.
M10
=4
External sensor
Sensor AI2 is used as an external sensor for control with compensation
M10 =5
Floor sensor for
zone 1
The AI2
VHQVRULVXVHGDVÀRRUWHPSHUDWXUHPHDVXUHPHQWVHQVRUIRU]RQH
M10
=6
Floor sensor for
zone 2
The AI2
VHQVRULVXVHGDVÀRRUWHPSHUDWXUHPHDVXUHPHQWVHQVRUIRU]RQH
M10
=7
Floor sensor for
zone 3
The AI2
VHQVRULVXVHGDVÀRRUWHPSHUDWXUHPHDVXUHPHQWVHQVRUIRU]RQH
M10
=8
Floor sensor for
zone 4
The AI2
VHQVRULVXVHGDVÀRRUWHPSHUDWXUHPHDVXUHPHQWVHQVRUIRU]RQH
M10
=9
Remote season
changeover contact
M11
=
0 1
Summer
Winter
M10
=10
Remote on/off
M11
=
0 1
On
Off
M10
=11
Non-occupied
holiday
M11
=
0 1
“Non-occupied holiday” mode
Occupied mode
M10 =12
Economy mode
M11 =
0 1
No economy mode
Economy mode
M10
=13 The AI2 sensor is used for the dew point calculation (only for the
MASTER or SLAVE_Y controller)
M10
=14 The AI2 sensor is used as limit sensor for the MASTER or SLAVE:Y
controller
M10
=15 Sensor not used
)RUFRQ¿JXUDWLRQV
M10
=9, 10, 11, 12, the analogue input 2 is used as a digital input. The contact is considered closed
if there is a short-circuit on the analogue input. The contact is considered open if there is no connection.