Ref.
013001000100
Rev.1: 18-01-2021
21
Top Zone Connections
NOTE:
In case you need to activate the reset button, it can be found by opening the top cover
and accessing the white reset button of the Arduino Nano board integrated inside de
enclosure.
NOTE:
The LEDs positioned at the top of the PLC, which go from led 0 to 9 refer to both inputs
and outputs.
For example, if you are using input I0.9, LED 9 on the top cover of the PLC will indicate the
signal status of this input.
If output Q0.9 is being used, LED 9 on the upper cover of the PLC will indicate the status of the
signal of this output.
An input and an output with the same nomenclature can never work at the same time (see
jumper configuration on section 7).
Summary of Contents for PLC 10
