Ref.
013001000100
Rev.1: 18-01-2021
10
1.
10 I/Os Digital Module: General Features
NOTE:
You can choose whether to use a digital input or a digital output from the internal
jumper configuration. You cannot use an input and an output at the same time with the same
nomenclature (e.g. I0.9 & Q0.9).
The maximum number of I/Os that can be used at the same time is 10. In section 7 of this
manual you can see how to individually configure each of them from the jumpers in the
COMPACT PLC 10 I/Os DIGITAL MODULE CPU
ARDUINO NANO
Input Voltage
12 to 24Vdc
Fuse protection (2.5A)
Polarity protection
Input rated voltage
24 Vdc
Rated Power
30 W
I Max.
1,5A
Size
100x45x115
Clock Speed
16 MHz
Flash Memory
32KB of which 2KB are used by
bootloader
SRAM
2 KB
EEPROM
1 KB
Communications
USB - RS485 - ETH
MAX487CSA - W5500
USB Consideration!
Only meant for uploading or
debugging, not always connected as
a serial in a project!
Cannot be working in a
final application
TOTAL Input points
10
TOTAL Output points
10
Digital Input 10bit
3,3
– 24 Vdc
220 VAc (3
– 48 Vdc)
3.3 to 24 Vdc
Freq: 10 Hz
Input Impedance: 27K
Separated PCB ground
Rated Voltage: 10 Vac
220 Vac (3
– 48 Vdc)
Input Impedance: 54K
Rated Voltage: 220 Vac
I min: 2 to 12 mA
Opto-isolation
Rated Voltage: 24 Vdc
Antipo Overcurrent
(220 Ac)
Digital Isolated Output
(5 - 24Vdc)
24 Vdc (23,2 Vdc)
I max: 300 mA
Optro-isolation
Rated Voltage: 24Vdc
Imax 24Vdc: 1 A
Expandability
USB - RS485 - ETH
Reference
IS. 013001000100
Summary of Contents for PLC 10
