Industrial Shields PLC 10, Manual

Page: 12 / 37

Ref. 013001000100 Rev.1: 18-01-2021
11
equipment hardware and configure the combination of inputs and outings that best suit your
needs.
2.
Technical Specifications
General Specifications:
Power supply
voltage
DC power supply 12 to 24Vdc
Operating
voltage range
DC power supply 11.4 to 25.4Vdc
Power
consumption
DC power supply 30 VAC max.
External
power supply
Power supply voltage 24Vdc
Power supply output
capacity
300 mA
Insulation resistance
20MΩ min. at 500Vdc between the AC terminals and the protective ground
terminal.
Dielectric strength
2.300 VAC at 50/ 60 Hz for one minute with a leakage current of 10mA
max. Between all the external AC terminals and the protective earth
terminal.
Shock resistance 80m/s
2
in the X, Y and Z direction 2 times each.
Ambient temperature (operating) 0º to 60ºC
Ambient humidity (operating) 10% to 90% (no condensation)
Ambient environment (operating) With no corrosive gas
Ambient temperature (storage) -20º to 60ºC
Power supply holding time 2ms min.
Weight 284g max.
Performance Specification:
Board ARDUINO NANO EVERY BOARD WITH HEADERS
Control method Stored program method
I/O control method Combination of the cyclic scan and immediate refresh processing methods.
Programming language
Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform
composed of a programming language. “similar to the C”.
http://arduino.cc/en/Tutorial/HomePage
Microcontroller ATmega4809
Flash Memory 48KB of which 2kB are used by bootloader