RuralConnect® Gen3 User Manual V1.0
Page | 41 of 57
Copyright
©
2020 Carlson Wireless Technologies, Inc. All Rights Reserved.
Figure 37: CPE User Interface
– LAN Configuration Screen
LAN Configuration Buttons - CPE
The page also has buttons for the
Routing Table
(see 4.4.1),
Interface Status
(see 4.4.3) and
VLAN Details
(see 4.4.2); all identical in operation to the base station. Finally, there is a button for
the
DHCP Server
.
Figure 38: CPE User Interface - Additional LAN Configuration Options
5.2.1. DHCP Server
The CPE provides a DHCP server that can be configured to supply IP addresses to devices on the
LAN in NAT Router and Router modes. This feature is disabled in Bridge mode; the central DHCP
server on the WAN will be available in this case.
The first part of the page allows the user to define the range of addresses that can be allocated.
Make sure the range of addresses is in the same subnet as the CPE LAN port address, but that the
LAN port address is not actually in the range. The lease period is usually 86,000 seconds (just under
24 hours).
The second part of the page lists the addresses that have currently been allocated by the DHCP
server.