RuralConnect® Gen3 User Manual V1.0
Page | 20 of 57
Copyright
©
2020 Carlson Wireless Technologies, Inc. All Rights Reserved.
Manager
Figure 6: Manager Screen
You should see a check in the “Enabled” box. The status must show “Channels allocated” to allow
the radio(s) to transmit.
Location
GPS-enabled units should show the number of GPS satellites visible from the Base Station.
Figure 7: Location Screen
Location & Antenna Height Manual Override
If the unit is not GPS-
enabled or no satellites are within range, click the “GPS Details” button at the
bottom of the
Radio Manager
Screen
. Under “Location Manual Override”, check the box next to
“Use” and then click the green checkmark.
Figure 8: Location Override Screen
For both the latitude and the longitude click on the appropriate field, enter the value, and then click
on the green checkmark.
Do not use the manual override function if GPS communication is available.
Once done, click the “Close” button.
Figure 9: Setting Manual Location Details