RuralConnect® Gen3 User Manual V1.0
Page | 24 of 57
Copyright
©
2020 Carlson Wireless Technologies, Inc. All Rights Reserved.
Are there 3
sectors found?
Regulation
authority should be
enabled and not
changeable
Go down To
R
adio
Manager Screen
Make sure GPS
shows satellites
found and the
coordinates are
correct.
Make sure the
antenna height
above ground level
is correct.
Go down into the
contact details and
make usre its filled
out like the
example
Go back up to the
Radio Manager
Screen
Check the
“manager status”
does it say “
Channels
Allocated
Set up Radios
Make sure that
Mac address is
different for each
sector
Unless you want
shared access,
make the SSID’s
different per sector
If the “Automatic
choose channels”
is selected than
channels should
be shown, and if
not, a channel list
appears when you
select it.
Your Radio
Manager screen
should then look
like this one.
Note that, like Wifi,
your encryption
security depends
on the strength of
the Passphrase.
Check the
“manager
status” does it
say “ Channels
Allocated
Check the
Gateway
connection
No
Yes
Figure 14: Base Station User Interface - Radio Manager Flowchart