1. When fully stopped, shift into neutral.
2. Move the engine stop/run switch to the STOP position.
3. Turn the power switch off.
UUSSIINNGG CCRRUUIISSEE CCOONNTTRROOLL
The cruise control switches are located on the right handlebar.
Read this section and understand how to safely operate this feature
before using the cruise control.
Cruise control can be activated and adjusted from the right control
using the Cruise Control Switch
q
.
Toggle Position
Function
Left
Set/Decelerate
Center
Off/On
Right
Resume/Accelerate
WARNING
Improper operation of cruise control could cause loss of control
and result in serious injury or death. Follow all cruise operation
procedures carefully. Never use cruise control when roads are
wet or slippery. Do not use cruise control when riding in heavy or
congested traffic.
CCRRUUIISSEE CCOONNTTRROOLL TTIIPPSS
• Cruise control can be set in gears 3-6.
• Vehicle speed must be above 20 MPH (32 km/h).
• Set speed will vary slightly in hilly terrain.
• Cruise control will not resume a pre-set speed if the resulting
acceleration or deceleration rate is too high or too low. For
example, resuming a set speed of 70 MPH from 40 MPH (64 km/
h), while in 6th gear, may cause cruise to disengage.
• Cruise control will not engage if brake lights are not operating
properly.
• The clutch or either brake must have been activated at least
once since the engine was started for the cruise control to
function.
81
Summary of Contents for Chief Dark Horse 2019
